Nominal Rated PP Melt Blown / Spun Cartridge Filters

Item No.: NBXA-2021110942
• Surface pore structure spreads water flow to reduce pressure drop
• Continuously gradient pore structure increases the capacity of dust holding, longer service life and high efficiency
• High strength and pressure resistance
• Micro-denier melt blown
Description

High performance pure polypropylene depth dual-gradient density filter media is under highly controlled manufacturing process which guarantees consistently reproducible filter performance. PM-series filters are comprised of an inner compact rated section for exceptional dirt-holding capability and the outstanding performance which meets the highest quality requirements are chosed for critical filtration application.
PM-Series cartridge is able to retain contaminants throughout the entire cross section of the filter. The density increases progressively from the exterior surface to the interior and "graded density" allows larger particles to be trapped near the surface while smaller particles penetrate the larger open areas to be trapped nearer the center of the filter in the smaller openings.

Applications

• Drinking water treatment
• Pre-filtration for RO+DI
• Food and beverage
• Plating, Chemicals and Solvents

 

Specifications

• Material : 100% PP microfiber
• Micron rating: 1, 3, 5, 10, ... 100um
• OD. 62-65mm/110-115mm; ID. 28mm
• Length: 5", 10", 20", 30", 40", 50", 60"

Operating Conditions

• Maximum differential pressure: 4.1bar at 20℃; 2.1bar at 60℃; 1.1bar at 80℃
• Recommended change out: 2.0bar
• Maximum temperature: 80℃


 

Dual-Gradient Density Media Rating (um)

Nominal Micron Rating (um) 1 3 5 10 25 50
Outer Pre-Filter Media (um) 25 25 50 50 75 100
Inner Compact Media (um) 1 3 5 10 25 50

Dirt Holding Capacity

Micron Rating(μm) 1 3 5 10 25 50
Dirt Holding Capacity(Gram/10"L) >15 >20 >30 >60 >120 >150


 
Model PM Media Type Support Core Dimension Micron Rating End Adaptor Seal Length Inch
               
PM-1
Standard
PM-2
Thin Groove
PM-3
Broad Groove
PM-4
Cavity Surface
P-High
Performance
A-Absolute
Rate
P-pp
N-none
S-ID28mm
OD62-65mm
B-ID28mm
OD110-115mm
L-ID96/114mm
OD150mm
01:1μm
03:3μm
05:5μm
10:10μm
......
......
Code 0-DOE w/o adaptor
Code 7 - 226/Fin
Code 8 - 222/Fin
Code 3 - 222/Flat closed
Code S - Spring Cap
E-EPDM
N-Buna
S-Silicone
V-Viton
5:5"
10:10"
20:20"
30:30"
40:40"
50:50"
60:60"